Airtrade
PRODUCTS | ABOUT | SEARCH | CUSTOMER LOGIN | ORDER STATUS | VIEW CART

categories
Shopping cart  Shopping cart
0 Product(s) in cart
Total £ 0.00
» Checkout

Login Status  Login Status

Not logged in

» Login
Please click on a category to view products.
 

Home » Products By Type » Service and Parts » All Products

BEA Replacement Filters

BEA Replacement Filters

The 'RB' and 'RA' elements are normally changed every 12 months unless the compressed air is very oily when a differential pressure of 0.6 bar will indicate a change. 'CA' carbon activated filters are normally changed ever 6 months.

If the element shows a high pressure differential - visable with the optional XAM-100 Differential Pressure Gauge then the filter element has done its job and it should be replaced. Replacing the filter element and maintaining a low pressure differential is cost effective as the loss of pressure will induce the compressor to operate less effectivly so increasing energy consumption.


 

Bambi Spare Parts

Bambi Spare Parts

All Bambi Spare Parts General Information

All parts carry a 6 month warranty.

UK, EU and Other Territory Delivery costs and our Business to Business Conditions of Sale Terms please see our HOME PAGE.

All Spare Parts Prices invoiced are in UK Pounds Sterling and do not include UK VAT

Shipping costas are calculated on the total weight shipped

Budget Range Specifications
Budget Range Handbook

MD Range Specifications
MD Range Handbook

VT Range Specifications
VT Range Handbook

VT Range Specifications
VT Range Handbook

HT Range Specifications
HT Range Handbook

Dental buying guide VTseries


 

BEA Drains, Kits and Options

BEA Drains, Kits and Options

The standard drain most commonly used is a XAD-251 float drain that is normally set to operate automatically as long as there is more than 0.6 bar in the filter - with less than 0.6 bar the unit fully opens to release any moisture trapped. This can be altered to semi-automatic so the drain does not open below 0.6 bar and to manual to force a discharge.

there are wall mounting kits and joining kits so the filters can be easily, safely and securely positioned.

Auto drains and 'No Air Loss' drains can also be fitted.
 

Boge Full Service Cairpac 3000 Kits

Boge Full Service Cairpac 3000 Kits

The Cairpac 3000 service kits contain an oil filter, oil separator, suction filter cartridge, wearing kit minimum pressure valve, wearing kit oil regulator, gaskets and solenoid maintenance kit.

Drive rating: 2.2 to 15kW (Series C) and 15 to 45kW (Series S)
50Hz at 400V.
 

Boge Standard Maintenance Service Kit

Boge Standard Maintenance Service Kit

The standard maintenance kits for C/S series screw compressors include an oil filter, oil separator, suction filter cartridges and a gasket.

Drive rating: 2.2 to 15kW (C Series) and 5.5 to 160kW (S Series)
50Hz at 400V.
 

Boge Popular V-belts

Boge Popular V-belts

To order a belt for a compressor with a pressure other than 8 bars please contact us on (+44) 1527 870 110.
 

Boge Popular Panel Filter

Boge Popular Panel Filter
 

Hydrovane Service Kits post 1995

Hydrovane Service Kits post 1995

These kits are genuine Hydrovane kits, supplied by the OEM, with the oil supplied by Morris Lubricants. This is a list of the more common kits - if the kit you requre is not shown, please contact us. If you require a service manual or other parts for your Hydrovane compressor, please e-mail us on sales@awi.co.uk or use the CONTACT e-mail above. KO kits are oil change kits usually required every 2000 operating hours or annually, KM kits after 1995 are full service kits with separators and MPV valve seats and seals, KSV kits are solenoid kits and KT kits are additional parts for a strip and re-assemble. but a KM kit is normally required if this major work is being undertaken.
 

KM Hydrovane Service Kits pre 1995

KM Hydrovane Service Kits pre 1995

The KM range of kits for older Hydrovanes covers all models manufactured until the mid 1990's. The kits are genuine Hydrovane Kits with the correct suitable parts for a 2000 hour or at most, annual service. These older units are still very servicable if looked after by operating them at the correct temperature - not over 90 degrees C oil temperature, and with good quality parts and lubricants, all of which you will find on this site. Airforce V2000-VG150 lubricant is ideal for these units. Also available are a range of Sparator Kits - KS Kits - and for major overhauls, the KT Kit range. If you need a manual, please e-mail us with a serial number and the HV series number and we may be able to send an e-mail (pdf) manual free of charge on condition the parts you require are purchased from us. We also supply other parts for Hydrovane products, old and new. Please e-mail your requirements and we will happily quote a price and availability.
 

KS Hydrovane Service Kits pre 1995

KS Hydrovane Service Kits pre 1995

The KS range of kits for older Hydrovanes covers all models manufactured until the mid 1990's. The kits are genuine Hydrovane Kits with the correct suitable parts for a 4000 hour or at most, bi-annual separator change. These older units are still very servicable if looked after by operating them at the correct temperature - not over 90 degrees C oil temperature, and with good quality parts and lubricants, all of which you will find on this site. Airforce V2000-VG150 lubricant is ideal for these units. Also available are a range of Service or Maintenance Kits - KM Kits - and for major overhauls, the KT Kit range. If you need a manual, please e-mail us with a serial number and the HV series number and we may be able to send an e-mail (pdf) manual free of charge on condition the parts you require are purchased from us. We also supply other parts for Hydrovane products, old and new. Please e-mail your requirements and we will happily quote a price and availability.
 

KT Hydrovane Service Kits pre 1995

KT Hydrovane Service Kits pre 1995

The KT range of kits for older Hydrovanes covers all models manufactured until the mid 1990's. The kits are genuine Hydrovane Kits with the correct suitable parts for a full strip and rebuild. KM and KS kits will also be required as will fresh oil. These older units are still very servicable if looked after by operating them at the correct temperature - not over 90 degrees C oil temperature, and with good quality parts and lubricants, all of which you will find on this site. Airforce V2000-VG150 lubricant is ideal for these units. Also available are a range of Service or Maintenance Kits - KM Kits - and for separator change, the KS kits. If you need a manual, please e-mail us with a serial number and the HV series number and we may be able to send an e-mail (pdf) manual free of charge on condition the parts you require are purchased from us. We also supply other parts for Hydrovane products, old and new. Please e-mail your requirements and we will happily quote a price and availability.
 

We cannot list all our products on this site - please call or e-mail us and we will help if we can. Call 01527 870110 (UK code 44)