Airtrade
PRODUCTS | ABOUT | SEARCH | CUSTOMER LOGIN | ORDER STATUS | VIEW CART

Airware International Limited
Shopping cart  Shopping cart
0 Product(s) in cart
Total £0.00
» Checkout

Login Status  Login Status

Not logged in

» Login

Home » All Products

 Checkout
 
Item Location: 158
AMD 3 Refrigerant Dryer 12 cfm
 
The AMD series of refrigerant dryers are matched to standard air compressor outputs to allow economic unit selection.

AMD dryers use the ALU DRY aluminium modular heat exchanger which has a vertical flow layout ensuring wet compressed air flows down to the condensate drain.

AMD 3 Flow rate 350 l/min 12 cfm @ 5 Deg C Pressure Dew Point
Connections 3/8"BSP-F
305mm W x 345mm D x 435mm H
Max Inlet Pressure 16 Bar
230v single phase electrical supply required.
23 kg



AMD 3 Data Sheet


Price: £515.00

BEA Technologies ARS100RB
Item Location: 2074

Details 

General Purpose 0.1 micron element for normal good quality factory air.
Replacement Element for CDF 100 filter body.

12 month warranty.
1 kg packed weight.
Price: £50.00

BAMBI BB8
Item Location: 5028

Details 

BAMBI BB8 Super Silent 40 d(B)A Compressor on 9 litre tank
Oil lubricated 0.5Hp, 8 bar with pressure regulator max 40 litre/min, 1.4cfm flow FAD, 230v-1-50Hz

Duty cycle of BAMBI BB8 is 50% with intermittent use.

12 month UK warranty.
21 kg packed weight.
Price: £300.00

BEA Technologies XAD251
Item Location: 2074

Details 

BEA Technologies Standard Fittment is the AD251 auto drain on all BEA CDF bodies from CDF 30 though to and including CDF 930 filters.

It is a three function auto drain.

Auto Drain mode - when pressure is in the filter, the float lifts if liquid is detected and the liquid expelled.
Semi-Automatic mode - when the pressure in the filter drops below 0.6 bar the valve opens and any liquid is discharged. This helps prevent stangnent liguid remaining in the filter.
Manual mode - the liquid can be discharged by turning the brass ratchet anticlockwise.

Price: £30.00

Mattei BLADE 4 L Air Compressor with receiver and dryer options
Item Location: 1005

Details 

BLADE 4 L
4 kW 5.5 hp motor
8 bar 115 psig Maximum Pressure
0.63 m3/min 22 cfm
61 dB(A)
950 mm (L) x 730 mm (W) x 800 mm (H)

The BLADE compressor range, with operating pressures from 8 to 13 bar, is the ideal solution for the needs of small and medium sized companies as well as artisan businesses. The rotary vane technology ensures high quality compressed air, an extremely compact airend and low noise levels. All combined with undisputed product reliability for any application.
Mattei 8 Bar 115 psi
10 Bar 145 psi
13 Bar 189 psi (+ £180.00)
Mattei Base Unit - No Receiver
270 litre Receiver Mounted unit (+ £280.00)
270 litre Receiver with dryer (+ £1,000.00)
Price: £2,270.00

Bambi HT3
Item Location: 5028

Details 

0.75HP motor running at 220-240V, with a 3 litre receiver, and makes only 53 dB(a) of noise. It has a flow of 79 L/Min at 1 Bar to a flow of 27 L/Min at 8 Bar.

12 month warranty..
10 kg packed weight.
Price: £480.00

Hydrovane HV01 - Tripod
Item Location: 2546

Details 

Hydrovane HV01 Tripod. Free Air Delivered is 4 cfm at 10 bar output pressure. DOL Start 1.1 kW IP55 motor (1 phase or 3 phase options) and a low noise level of only 62 dB(A) There is also an air aftercooler kit available to take out 60% of the condensate in the air. The dryer option for the HV01 - Tripod is a free standing refrigerant dryer complete with oil removal filter.

Special reduced net prices have been applied. 12 month UK wide full warranty.

Base unit List Price £ 1,721.00 plus delivery - our price only £ 1,548.90 with Free UK Mainland Delivery!

Hydrovane Brochure


Price: £1,548.90

Jorc 2323 EZ-1 Drain
Item Location: 7401

Details 

The EZ-1 is our economy applications timer controlled condensate drain. This economy timer controlled has a 4.0mm valve orifice and runs at 115VAC. It has a maz. pressure of 16 bar.

Please select a connection size.

Price: £45.00

 
Item Location: 7401
Jorc 950020 Universal Condensate Test Kit
 
Test Kit including bottle and container for testing condensate waste.
Price: £10.00

JORC 9602 SEPREMIUM 2 70 cfm capacity Compressed Air Condensate Oil - Water Separator
Item Location: 7401

Details 

The SEPREMIUM range of oil/water separators separates oil from condensate, generated by compressed air systems.

The SEPREMIUM achieves efficient separation of oil from condensate by means of directing the condensate through various separation stages. As condensate flows into the SEPREMIUM, the oil is filtered out through the oil adsorbing element resulting in a discharge generally below 10 ppm oil residue values at the output stage. Some compressor lubricants and old very hot or dirty compressors may require additional or higher capacity condensate filtration.

The SEPREMIUM 2 drops in to its holding bracket (supplied as standard). Servicing involves disconnecting the inlet and outlet, removing the separator and placing the new unit in the holding bracket. There are no separate elements and servicing is a quick and above all a clean process.
The SEPREMIUM 2 is designed to operate with all compressors using mineral or semi synthetic lubricants which have a capacity of up to 70 cfm, or 2m³/min. and are operated according to the compressor manufacturers guidlines.

A fixing bracket is also included that allows wall or floor mounting.
Price: £100.00

LaMan MD-15LS Membrane Dryer
Item Location: 3085

Details 

The LaMan MD-15LS Membrane Dryer comes complete with float drain, and 0.01 micron Filter Pre-Filtration System. Ideal for point of use very dry air - down to minus 40 degrees C Pressure Dew Point!

15 cfm flow at up to 150 psi (0.42 m3 / min @ 10 bar) 1/4" connections.

MD Series LaMan Membrane Dryers are ideal for local point of use very dry very clean compressed air - and are used in paint spraying, food processing, laboratory and any number of applications demanding clean dry compressed air.

See 050SKA for prefilter service kit and SAM350E for the fine filter service kit.

Product weight 15 kg. Allow 5 - 7 days for delivery.
Price: £1,295.00

Walker Filtration PD004 Desiccant Compressed Air Dryer

Details 

Walker Filtration PD004 Desiccant Compressed Air Dryer with a capacity of 4 cfm @ 7 bar pressure and a pressure dewpoint of -40 degrees centigrade with an inlet temperature of 35 degrees centrade.

Package includes 0.1 micron, 0.01 micron pre filters and after dryer desiccant dust removal filters of appropriate capacity, as well as PDFS01 PRO DRY energy management, monitoring and diagnostics option.

16 kg's
Price: £1,186.00

 
PDC004 Service Kit for PD004 Desiccant Dryer
 
PDC004 Service Kit contains all the items required for a full 1200 hour or 2 year (whichever soonest) service on a PD004 Walker Filtration Desiccant Dryer.

Kit includes elements for the two pre filters and the dust filter.
Price: £261.00

 
VSKS01 ProDry Valve Service Kit for PD004 to PD035
 
Service kit contains exhaust valve diaphragm, exhaust valve solenoids, shutte valve, 'O' rings and instructions.
Price: £312.00

BAMBI Air Compressor 75/80
Item Location: 5028

Details 

'MD' Medical/Dental Range - oil lubricated, low 55 db(A) noise, 0.5Hp 78 l/min on a 9 litre receiver.

12 month warranty..
33 kg packed weight.
Price: £740.00

 
Item Location: 158
AMD 6 Refrigerant Dryer 21 cfm
 
The AMD series of refrigerant dryers are matched to standard air compressor outputs to allow economic unit selection.

AMD dryers use the ALU DRY aluminium modular heat exchanger which has a vertical flow layout ensuring wet compressed air flows down to the condensate drain.

AMD 6 Flow rate 600 l/min 21cfm @ 5 Deg C Pressure Dew Point
Connections 1/2"BSP-F
370mm W x 515mm D x 475mm H
Max Inlet Pressure 16 Bar
230v single phase electrical supply required.
27 kg



AMD 6 Data Sheet


Price: £543.00

BEA Technologies ARS100RA
Item Location: 2074

Details 

Fine 0.01 micron element for oil removal.
Replacement Element for CDF 100 filter body

12 month warranty.
1 kg packed weight.
Price: £50.00

BAMBI Air Compressor BB15
Item Location: 5028

Details 

BAMBI BB15 Super Silent 40 d(B)A Compressor on 15 litre tank with wheels
Oil lubricated 0.5Hp, 8 bar with pressure regulator max 40 litre/min, 1.4 cfm flow FAD, 230v-1-50Hz

Duty cycle of BAMBI BB15 is 50% with intermittent use.

12 month warranty.
28 kg packed weight.
Price: £300.00

BEA Technologies XAD300
Item Location: 2074

Details 

BEA Technologies Manual Drain. Fits all CDF bodies up to and including CDF930.

Price: £13.12

Boge C3L
Item Location: 71

Details 

Boge C3L Screw Compressor IP55 F Class 2.2 kW 3 phase electric motor produces 9 cfm @ 10 bar output.

Extremely quiet from only 61 dB(A) and with LCD Pressure Transducer BASIC control panel with 24v control voltage as Standard.

Also standard (and not normally found on such sized compressors) is an aftercooler so the discharge air is only 10 or 15 degrees above ambient, and there is frost protection control as well.

Delivery generally ex stock.

Contact us about other C3L options including 230v single phase supply, food grade oil and short run control systems.

CL Technical Data

Price: £3,030.00

« | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10... | »

We cannot list all our products on this site - please call or e-mail us and we will help if we can. Call 01527 870110 (UK code 44)